What Glue Does the Step Nosing Use?

Step nosing is a common commodity in many social construction environments. Wuyi Xiongchang Hardware Manufacturing Co., Ltd is a manufacturer and wholesaler of anti-skid strips, making aluminum step nosing and other types of step nosing.

Ⅰ. What kind of glue is used for step nosing

Different materials of non slip stair edge nosing use different glues. If there is any entanglement, you can use all-purpose glue to fix it. The introduction of all-purpose glue is relatively wide. It is a kind of adhesive with a strong adhesive ability and a wide range of applications. It can be used for self-adhesion or mutual adhesion of rubber, leather, fabric, cardboard, wood-based panels, wood, foamed plastics, ceramics, concrete, and metals. And its sticking ability is good.

Ⅱ. Installation method of step nosing

(1) First, the plane and elevation of the stairs should be 90 degrees. Then clean the stair steps, apply all-purpose glue on the front edge of the stairs and the back of the stair anti-skid strips, wait for a little dry and glue them, and hit the glued places with a rubber hammer.

(2) Or punch holes in the aluminum alloy base, fix the step nosing on the stair surface with screws, and insert the glue strip on the surface.

(3) The corner metal buckles are used to fix both ends of the corners, which not only prevents the non slip stair edge nosing from shrinking and falling off, but also achieves advanced and beautiful effects.

Ⅲ. Cleaning and maintenance of step nosing

(1) The cleaning tools must be cleaned before using to ensure that the cleaning tools are used in a clean state and avoid secondary oil pollution on the ground during cleaning.

(2) The floor after anti-skid treatment needs to be cleaned frequently. It is necessary to use alkaline cleaning liquid or porcelain surface alkaline cleaner diluted with water to a concentration of 1:7-10 every day, and then evenly sprinkle or wet it on the ground with a flat mop.

(3) Rinse with clean water, dry with a clean mop or wiper or dry with a water scooping machine.

(4) The mop should be used in a clean state. Use a plastic box to fill half a box of water, add washing powder or detergent, remove the used mop cloth, put it in the box and soak it for about 20 minutes before taking it out. Then rinse with clean water and dry.

If part of the ground is particularly greasy, the step nosing should be cleaned regularly, so that the anti-skid effect remains the same. If you have any need, please feel free to contact us. Our quantity is large and the price is good. Welcome to contact us.